Heyco-Flex™ Tubing

• 3/8" thru 2" sizes.
• Extremely flexible PVC with a convoluted surface.
• Lightweight.
• Suitable for light duty drainage, air, vacuum gravity feed, and other equipment/OEM applications.

• 3/16" thru 2" sizes.
• Clear, flexible, reinforced PVC.
• Suitable for high working pressure under harsh conditions.
• For use in industrial applications, factory air lines, automation machinery, pneumatic lines, and water mains/feeds.
• For use with barb style hose connectors.

• 3/8" thru 2" trade sizes.
• Use with nylon Heyco-Flex Connectors; Snap-in, Straight or Sweep. See pages 0-18, 0-19, 1-20.
• May also be used with Heyco’s Die Cast Fittings for Liquid Tight Conduit. See page 0-23 or 0-24.
• Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
• Resists abuse, pull, and crushing.
• Temperature ratings : 80°C (203°F) DRY 70°C (160°F) OIL Resistance 60°C (140°F) WET locations
• Passes submersion test of 70 psi.
• Mounting brackets are available.
• Smooth inside for easier wire pulling; no hazardous sharp edges or burrs; will not damage conductors.
• Lightweight and lower ...
  
  

• 1/4" thru 2" trade sizes.
• Use with nylon Heyco-Flex Connectors: Snap-in, Straight or Sweep.
• May also be used with Heyco Die Cast Metal Fittings for Liquid Tight Tubing.
• Resists corrosion, oil, and water.
• Maximum flexibility; can be used in extremely tight quarters.
• Temperature rating 70°C (160°F).
• Smooth inside for easier wire pulling.
• Lightweight and lower installed cost.
• Quick installation; cuts with utility knife, PVC cutter or Heyco cutting tool (#8340).
• Integral rigid and flexible PVC construction.
• Ideal for fiber optic cable protection.
• Suitable for use in high vibration or flexing applications :
  • Automotive ...
    
    

• Thirteen sizes 1/8" to 1 1/2".
• Slit design allows side entry and encirclement of pre-assembled harnesses and capillary tubes.
• All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.
• Heyco-Flex V is lightweight and flexible, yet durable enough to meet your wire management requirements.
• Unique slit design allows for wire breakouts.
• Quick installation; cuts with utility knife, PVC cutter or Heyco cutting tool #8340.
• Consult Heyco for slit tubing cut to length.
• Material : Polyamide 6 “Nylon” .
• Flammability Rating : 94HB.

Foreign Patents

• Five sizes, 1/4" thru 1", for use with Heyco-Flex Conduit and Tubing.
• Assembly friendly! The installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be “snapped” into the panel with fingertip pressure.
• No threading of the conduit or tubing required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
• Complete conduit/fitting system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
• Suitable for indoor/outdoor use; for ...
  
  

Foreign Patents

• Eight sizes for use with 1/4" thru 2" Heyco-Flex Conduit and Tubing.
• All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification and testing.
• No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
• No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
• Complete ...
  
  

Foreign Patents

• Sizes 3/8" thru 2" for use with Heyco-Flex Conduit and Tubing.
• Smooth internal surfaces for easier wire installation around corner angles.
• Resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification and testing.
• No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
• No threading of the conduit or tubing is required to install. This eliminates the ...